JSON-LD markup generated by Google Structured Data Markup Helper.

Call (909) 790-1835

Go to…

Dodge

Home / Dodge

We Service and Repair all Dodge cars

  • 2012 Dodge Charger

    Dodge Charger
    Mileage
    105,754
    Service Date
    3/22/2023
    Services Performed
    • With watching live scan data found, Knock sensor 1 is at 0.40 – 0.50 mil a volts Knock sensor 2 is at 0.20 – 0.23 mil a volts RECOMMEND TO REPLACE BOTH KNOCK SENSORS DO TO LOCATION/LABOR INTENSIVE
    • KNOCK SENSOR – Remove & Replace – V6 One or Both – [Includes: R&I Intake Manifold Gaskets.]
     
    CELINA H. gave our service a 5 star review on 3/22/2023

  • 2006 Dodge Magnum

    Dodge Magnum
    Mileage
    123,595
    Service Date
    1/26/2022
    Services Performed
    • CHANGE ENGINE OIL AND OIL FILTER
     
    LOUANE W. gave our service a 5 star review on 1/26/2022

  • 2017 Dodge Grand Caravan

    Dodge Grand Caravan
    Mileage
    121,374
    Service Date
    11/9/2021
    Services Performed
    • IGNITION SYSTEM HAS ORIGINAL PARTS. RECOMMEND REPLACE SPARK PLUGS. DIRTY ENGINE FILTER, INTAKE CARBON CLEANING. RECOMMEND TO REPLACE INJECTOR #2 AND PREFORM A MINOR ENGINE TUNE UP
    • ELECTRONIC IGNITION (MINOR) – Tune – INCLUDES REPLACING SPARK PLUGS, ENGINE AIR FILTER, CLEAN THROTTLE BODY & RESET IDLE ADAPTIVES. INSPECT COILS AND BOOTS. REMOVE AND REPLACE INJECTOR #2
     
    Mary R. gave our service a 5 star review on 11/10/2021

  • 2015 Dodge Grand Caravan

    Dodge Grand Caravan
    Mileage
    64,603
    Service Date
    11/2/2021
    Services Performed
    • LIVE DATA SHOWS OXYGEN SENSOR B2S1 TO BE STAGNANT AT LOW VOLTAGE. SCOOPED AND FOUND THIS FAULTY OXYGEN SENSOR IS SKEWING ENGINE MANAGEMENT TO RUN OUT OF CALIBRATION. RECOMMEND REPLACE OXYGEN SENSOR B2S1.
    • OXYGEN SENSOR – Remove & Replace BANK 2 SENSOR 1, INCLUDES CLEARING CODES AND RE CHECKING SCAN DATA
     
    JOHN A. gave our service a 5 star review on 11/2/2021

  • 2006 Dodge Pickup

    Dodge Pickup
    Mileage
    248,801
    Service Date
    11/1/2021
    Services Performed
    • MUST CHECK THE RETURN FLOW. NO CODES IN INSTRUMENT CLUSTER. GLOW PLUG LAMP REQUEST ON. SELF TEST OF MECHANICAL INSTRUMENT CLUSTER PROVES ALL TELLTALES WORKING PROPERLY. TSB 18-006-12 DIAGNOSTIC ENHANCEMENT FOR FUEL SYSTEM. THIS BULLITON PROVIDES ECM SOFTWARE ENHANCEMENTS TO IMPROVE ROBUSTNESS OF FUEL SYSTEM DETECTION. THIS VEHICLE WILL REQUIRE A INJECTION RETURN FLOW TEST AND POSSIBLY AN ECM RE FLASH UPDATE TO DETERMINE FAULT. UPON CLEARING PCM CODES, GLOW PLUG LIGHT REMAINS OFF.
    • TAIL LAMP SOCK ASSEMBLY – Remove & Replace – Each
     
    BOB S. gave our service a 5 star review on 11/1/2021

  • 2015 Dodge Journey

    Dodge Journey
    Mileage
    97,259
    Service Date
    4/8/2021
    Services Performed
    • CHANGE ENGINE OIL AND OIL FILTER
    • RECOMMEND REPLACE CYLINDER 3 IGNITION COIL AND ALL 6 SPARK PLUGS. ENGINE OIL AND FILTER PAST DUE. RECOMMEND REPLACE ENGINE AIR FILTER.
    • REMOVE AND REPLACE – SPARK PLUGS CLEAN THROTTLE BODY, INC IDLE RE LEARN REPLACE IGNITION COIL FOR CYLINDER 4, REPLACE AIR FILTER.
     
    KEVIN C. gave our service a 5 star review on 4/8/2021

  • 2007 Dodge Caliber

    Dodge Caliber
    Mileage
    115,594
    Service Date
    12/2/2020
    Services Performed
    • DIAGNOSIS- FOUND TWO DRIVE BELT IDLER BEARINGS HAVE GONE BAD, CAUSING DRIVE BELT SO BE DAMAGED RECOMMEND TO REPLACE THE IDLER BEARING UPPER AND LOWER, AND TENSIONER ASSEMBLY ALONG WITH DRIVE BELT
    • SERPENTINE BELT TENSIONER – Remove & Replace IDLER BEARING UPPER REMOVE AND REPLACE IDLER BEARING LOWER REMOVE AND REPLACE DRIVE BELT REMOVE AND REPLACE
     
    Ernie J. gave our service a 5 star review on 12/3/2020