2012 Ford Pickup
Mileage
215,686
Service Date
3/15/2024
Services Performed
- P0183 – FUEL TEMP SENSOR CIRCUIT VOLTAGE HIGH. THIS CODE IS POSSIBLY SET DO TO A BROKEN SUPPLIED GROUND TO THE SENSOR. PIN OUT TEST SHOWS A LOSS OF SENSOR GROUND, WAS ABLE TO CONFIRM A GOOD GROUND AT THE PCM, RECOMMEND TO WIRE A NEW WIRE NEXT TO ORIGINAL HARNESS AND ELIMINATE FINDING THE BROKEN WIRE. OTHER CODES ARE P0700 – TRANSMISSION CONTROL MODULE REQUEST TO HAVE CHECK ENGINE LIGHT ON & U0100 LOST COMMUNICATION WITH ECM – ADVISED CUSTOMER THE TRANSMISSION CODES SHOULD BE DIAGNOSED AT A TRANSMISSION REPAIR FACILITY & THE COMMUNICATION CODE WOULD REQUIRE ADDITIONAL DIAGNOSTIC TIME @ $189.95 AND COMMUNICATION CODE START WITH A MIN OF 2 HOURS TO START.
- ADD A NEW WIRE TO THE ENGINE FUEL TEMP SENSOR. SOLDER IN WIRE FROM PCM/ECM CONNECTOR TO THE FUEL TEMP SENSOR CONNECTOR, SECURE IN NEW LOOM AND RUN NEXT TO MAIN ENGINE HARNESS
WES M. gave our service a 5 star review on 3/28/2024
